1. HOME
  2. Forming machines, Tube Mill Machines, and other Special-purpose machines
  3. Forming Machines
  4. Machines for Construction related products

Machines for Construction related products

 

AP-50D Cassette-type Double-tooling Angle Stud Forming Line

AP-40D Cassette-type Forming Line with Flying prenotch dies

AP-50D Scalable-type Cutlength Sheet Forming Line with Prenotch machine

AP-55D Cassette-type Frame Forming Line with punching machine

AP-50D Cassette-type Forming Line with flying prenotch, piling and binding devices

 

AP-50D Cassette-type Double-tooling Angle Stud Forming Line

This is a line to produce square stud steel branderings of housing-related building materials.Cassette-type roll stands on this forming machine enable a quick tool change for production of another cross-sectional profile. Moreover, because double-tooling type machine has 2 series of roll stands, tools can be changed and prepared for next production during operation using the other series of tools without stopping the whole line.

 

Joint is not welded but caulked to make the square shape as it being molded.Products are cut by the double action cut method, which gives nice cut surfaces without deformation on cross-sectional shape.According to the product shapes, the designated number of finished products are automatically aligned to be bound up in a small bundle. These small bundles are again bound up in the predetermined way in a big bundle. Several big bundles can be stocked on the table.

 

building_img01.jpg building_img02.jpg building_img03.jpg

 

building_img04.jpg building_img05.jpg

 

 

AP-40D Cassette-type Forming Line with Flying prenotch dies

This is a line to produce 5 types of corner posts of residential bath units.

The preprocessing section, or flying prenotch section, carries out piercing and notching process before molding the steel strip

With the auto-cassette changer, cassette-type roll stands on this forming machine enable a quick and unmanned tool change. The auto-cassette changer can change a series of cassettes for one cross-sectional profile at a time

Finished products are piled on the pallets designed for the products by an unattended robotic device. Automatic pallet feeder is also installed.The products of 400mm~2200mm in length are feasible and of 1400mm~3200mm in length are able to be piled automatically.

 

building_img06.jpg building_img07.jpg building_img08.jpg

 

building_img09.jpg building_img10.jpg building_img11.jpg

 

 

AP-50D Scalable-type Cutlength Sheet Forming Line with Prenotch machine

This is a line to produce steel forms for concrete foundation works.

The preprocessing section, or prenotch section, includes piercing, notching, marking and shirring process.

Outboard-type roll stands on this forming machine enable a quick change of stand width depending on the width of product. Feasible product width on this line is between 200mm and 1200mm, and length between 1500 and 2250mm.

Clamping device placed at the entry point to the forming machine clamps and feeds the cutlength sheet to be engaged in the roll stands in order to keep the sheet materials on the right track.

 

furniture_img01.jpg furniture_img02.jpg furniture_img03.jpg

 

furniture_img04.jpg furniture_img05.jpg furniture_img06.jpg

 

 

AP-55D Cassette-type Frame Forming Line with punching machine

This is a Cassette-type Frame Forming Line to produce metal channels for residential members efficiently.

Double crank press machine of 110 ton pierces holes on the coil material fed by NC-leveler feeder.

Tha main forming machine is cassette type.

Moreover, each roll stand is attached to motor.

Frequent adjustment can be completed with just a single touch of button.

 

shape_img01.jpg shape_img02.jpg

 

 

Sliding uncoiler

shape_img03.jpg shape_img04.jpg

 

Extendable conveyor and run-out table

shape_img05.jpg

 

Pre-punching machine

shape_img06.jpg shape_img07.jpg

   Pre-punching machine      Pre-punching machine (Front)

 

Machine ofr cutting and joggling

shape_img08.jpg shape_img09.jpg

 Machine ofr cutting and joggling   Machine ofr cutting and joggling

 

Cassette-type forming machine

shape_img10.jpg

 

The cutter, including flying cutting and joggling processes, does simultaneously double-cutting and drawing press, or joggling bending.

This machine draws the part around a cutting point by the sheet thickness.

Maximum speed is 20 cuts per minute.

Efficient production can be realized by receiving manufacturing directions including necessary specifications and quantities from a superior computer.

 

shape_img11.jpg shape_img12.jpg shape_img13.jpg

  Die ofr cutting and drawing         Punching die          BURS-type roll stands

 

shape_img14.jpg shape_img15.jpg

   BURS-type roll stands          Product samples

 

 

AP-50D Cassette-type Forming Line with flying prenotch, piling and binding devices

This is a line to produce square stud steel branderings of housing-related building materials.The preprocessing section, or flying prenotch section, carries out piercing process before molding the steel strip.

Joint is not welded but caulked to make the square shape as it being molded.

Products are cut by the double action cut method, which gives nice cut surfaces without  deformation on cross-sectional shape. According to the product shapes, the designated number of finished products are automatically aligned to be bound up. These small bundles are again bound up in the predetermined way in a big bundle. Several big bundles can be stocked on the table.

The products of 300mm~6000mm in length are feasible, and able to be piled and bound automatically.

 

building_img12.jpg

 

building_img13.jpg building_img14.jpg

 

building_img15.jpg building_img16.jpg

 

 

Business & Products

BURS21
BURS21 is developed as a part of our corporate brand strategy, “Beauty follows Functions”. The beautiful design of BURS21 creates totally new working environment for old-fashioned roll forming plants. We believe this machine triggers innovations in production sites in Japan.
FTL
The next-generation tube mill, the Fine Tube Mill Line, is our solution to the shortage of experienced operators. FTL, designed not to rely on the skills of individual operators, allows any operators to perform high precision processing with low cost.
Forming rolls
Our forming roll division completes all processes from designing, heat treatment, and machining, to test runs of forming rolls, having one of the best total in-house production systems in the industry.
Forming Machines, Tube Mill Machines, Special-Purpose Machines
We do not just make machines but design, produce, run trial tests, and provide services after delivery. By joining your planning process, we meet your request totally. We have unique skills that other company can't compete with.
Bollard, Car/Bicycle Parking lots, and Devices
We provide you with self-service car parking control systems that are more eco-friendly, more human-friendly, easier, and safer and bollards with enhanced quality and safety.
Heat treatment & Dies
Our skills and knowledge accumulated for years enable us to manufacture the wide range of products from dies to cutters of shredder, crusher, and etc. These dies are crystallization of our relentless efforts.
Park’n park
An affiliate company, Park’n park, aspires to contribute to the local communities with our 24-h self-service car/bicycle parking lots.

ISO 9001認証取得